ENGINEERING
The company “HIMMASH-APPARAT” is ready to organize and implement the next volume of engineering works for the production of process equipment.
PROJECT MANAGEMENT
- Project Management
- Development and approval of a detailed project schedule
- Monitoring and coordination of activities
- Development and coordination of corrective action plans
- Quality control at all stages of the project
- Preparation of regular reports to the customer about the progress of the work
Process calculations based on the accumulation of knowledge in the most efficient processes with the use of modern devices and technologies.
Based on the initial data set and the desired results, we are ready to pick the most effective solutions in various industrial processes, especially in the field of filtering, mixing, mass transfer.
Technical Documentation
Strength calculations made with regard to internal and external loads – both vehicles in general and their individual elements (flanges, bottoms, etc.). Experience shows that taking into account all the factors that affect the strength of the devices, using existing standards for strength calculations can often significantly reduce the weight and size of standard devices.
Development, coordination, approval and implementation of regulatory documents.
Preparation of drawings for vehicles made in including the use of 3-D modeling.
TU 0993-001-21414987-2012 “two-ply sheet steel corrosion-resistant, manufactured by explosion welding” (to the base layer of carbon steel grades 22K, 22K-W, 22K-VD and cladding layer of corrosion-resistant steel 08Cr18Ni10Ti).
To ensure the quality of two-layer sheet The company has developed a quality system that includes incoming inspection of raw materials, process control at all stages of production, control of finished products. Testing of mechanical properties of bimetal performed in certified laboratories.
TU 0995-175-00220302-2012“corrosion-resistant sheet steel double-layer and three-layer, produced by explosion welding” (included in the state register of 06.12.2012 for № 200/113246)
These specifications apply to manufactured explosion welding dual-layer and three-layer corrosion-resistant sheets to the base layer of carbon, low alloy or stainless steel and cladding layer of corrosion-resistant steels and alloys, and are intended for use in machinery and equipment oil and gas refining, petrochemical, chemical and others. explosive production (for the manufacture of heat exchangers, tube sheets, reactor vessels, columns, vessels, etc. technical devices).
TU 1882-174-00220302-2013 Harvesting two- and three-layer sheet of copper-based, manufactured by explosion welding” (included in the state register of 17.01.2013 for № 200/113533).
These specifications apply to manufactured explosion welding dual-layer and three-layer blanks based on copper and designed for use in the electrical industry, energy and nuclear engineering and equipment electrometallurgic, oil and gas, petrochemical, chemical and others. Explosive production (for making contacts in the electrolytic production , transition elements of power circuits, transformers, adapters and flat contact conductive elements, equipment enclosures, tube sheets and others. technical devices).
This specification covers the manufacture of static mixers, pressure not exceeding 10 MPa and at a wall temperature at below -70 ° C in technological systems of transportation of petroleum products for the chemical, petrochemical, oil and other explosive and chemically hazardous industries.
These technical specifications (TS) shall apply to the production of centrifugally cast tubes of corrosion-resistant copper-nickel alloy NMZhMts 28-2,5-1,5 and nickel-based alloy HN65MV operating at temperatures from -70 to + 400 ° C and operating pressure up to 5 , 0 N / mm2 (50 kg / cm 2) in the case of static mixers, etc. equipment in hazardous industrial oil and gas facilities (in contact with various aggressive environments: solutions of neutral, weakly acidic and alkaline salts of hydrofluoric acid, sulfuric acid, hydrochloric acid in reducing environments , concentrated alkalis, except NH4OH – alloy NMZhMts 28-2,5-1,5, sulfuric and hydrochloric acid solution having oxidative character of sulfur, chlorine, hypochlorite and chlorine dioxide – alloy HN65MV).
These technical specifications (TS) shall apply to the production of shaped castings of corrosion-resistant copper-nickel alloy NMZhMts 28-2,5-1,5 and nickel-based alloy HN65MV operating at temperatures from -70 to + 400 ° C and operating pressure up to 5 , 0 N / mm2 (50 kg / cm 2) in the case of static mixers, etc. equipment in hazardous industrial oil and gas facilities (in contact with various aggressive environments: solutions of neutral, weakly acidic and alkaline salts of hydrofluoric acid, sulfuric acid, hydrochloric acid in reducing environments , concentrated alkalis, except NH4OH – alloy NMZhMts 28-2,5-1,5, sulfuric and hydrochloric acid solution having oxidative character of sulfur, chlorine, hypochlorite and chlorine dioxide – alloy HN65MV).
Technical conditions apply to manufacture mixers static and their components from corrosion-resistant copper-nickel alloy NMZhMts 28-2,5-1,5 and nickel-based alloy HN65MV working pressure not exceeding 5.0 MPa (50 kgf / cm2) at a wall temperature of minus 70 to plus 400 ° C in technological systems of transportation of various liquid, gas and vapors in the chemical, petrochemical, oil refining, gas processing, chemical pharmaceutical, pulp and paper, microbiological, coke-chemical, oil and gas companies and other explosive and chemically hazardous industries.
